Do it yourself
Frequently asked questions about cars and motorcycles
The instructions in this guide will allow you to remove and replace the drive belt and variator of the Sym Mio 50 scooter. First, place the scooter on its stand and start unscrewing all the screws securing the transmission cover; then remove the fan by unscrewing the central nut, as shown in the video. At this point, also remove the variator and disconnect the drive belt, replacing the components with new original ones; reassemble all the transmission elements in order, finally securing the side cover.

Posted on 18 June 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various When you start to hear a squeaking noise from the belt during deceleration, it is probably time to replace it. To proceed with the replacement, follo…
(Various brands) Various To replace the drive belt on this scooter, you must first remove the right side cover to access the transmission. Using a socket spanner, begin remov…
(Various brands) Various In this video tutorial, you will see how to remove the rollers from the variator of a generic scooter. The procedure may vary from scooter to scooter…

How to Replace the Clutch on a Triumph Speed Triple?

To replace the clutch on a Triumph Speed Triple, loosen the bolts securing the covers of the three casings located on the right side of the bike, namely the starter motor, the engine, and then the clutch. Once these covers are removed, you can access the bolts securing the clutch, unscrew them, and slide the clutch plates out of their housing. This will allow you to insert the new plates into their place, securing everything with the appropriate bolts; finally, reinstall all the casings.

Watch the video!


by ScegliAuto

More videos