Do it yourself
Frequently asked questions about cars and motorcycles
In this video tutorial, you will see how to remove the rollers from the variator of a generic scooter. The procedure may vary from scooter to scooter but is generally the same for all. First, remove the screws from the cover and take it off: then access the variator and pulley; using a special tool, extract the variator as shown in the video and remove the belt. Now replace the variator rollers, opting for lighter or heavier ones. Finally, reassemble everything!

Updated on 29 March 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various In this video we see how the variator of a scooter works, so how to transform the engine RPM into effective thrust. The main components are the movab…
(Various brands) Various The instructions in this guide will allow you to remove and replace the drive belt and variator of the Sym Mio 50 scooter. First, place the scooter o…
(Various brands) Various When you start to hear a squeaking noise from the belt during deceleration, it is probably time to replace it. To proceed with the replacement, follo…

How to Remove the Engine from a KTM EXC 300?

To remove the engine from the KTM EXC 300, you need to take out the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is removed, unscrew the bolts that secure the cylinder at the top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. The necessary parts can now be replaced, and you can subsequently reassemble all the components that were removed earlier.

Watch the video!


by ScegliAuto

More videos