Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Drive Belt on Any Type of Scooter

Model: (Various brands) Various
Part:

Video tutorial

In this video, see how to fit the drive belt on any type of scooter: first, fit the clutch assembly with the nut, then fit the fixed pulley of the variator, and tighten the belt halfway. But how do you thread the belt without pinching it? The YouTuber removes it to show a trick: you need to get some talcum powder and "dust" the sides.

Now refit the belt and tighten it, moving the plate forward until the fixed plate touches the pulley. If you need to remove it, use a piece of old belt at nine o'clock, and you can take it off yourself without needing help or other tools.

Now let the belt run idle for a few seconds to settle.


Updated on 25 August 2026 by ScegliAuto


Related tutorials

How to replace the belt on a scooter?
How to replace the belt on a scooter?
(Various brands) Various This type of belt replacement is the same for all scooters. The belt should be replaced at 9,320 miles (15,000 km). Purchase a new original belt. The…
How to Remove the Variator and Drive Belt from a Sym Mio 50
How to Remove the Variator and Drive Belt from a Sym Mio 50
(Various brands) Various The instructions in this guide will allow you to remove and replace the drive belt and variator of the Sym Mio 50 scooter. First, place the scooter o…
How to Replace the Belt on a Kymco
How to Replace the Belt on a Kymco
(Various brands) Various If you need to replace the drive belt on this scooter model, the description below contains all the necessary information for the replacement, and yo…

How to Replace the Air Filter on a BMW G310 GS?

To replace the air filter on the BMW G310 GS, lift the motorcycle seat to access the screws securing the tank at the front of the vehicle. Once these screws are loosened, along with those on the side of the tank, you can detach the tank and access the air filter box underneath. Open the air filter box to remove the old air filter, which can then be replaced with a new one. After replacement, reassemble all the components that were removed.

Watch the video!


by ScegliAuto

More videos