Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Belt on a Kymco

Model: (Various brands) Various
Part:

Video tutorial

If you need to replace the drive belt on this scooter model, the description below contains all the necessary information for the replacement, and you can also check the video. First, remove the screws securing the belt protection cover located on the left side.

Then, you will have access to the compartment containing the belt and proceed to unscrew the fastening bolt of the two pulleys. At this point, you can extract the belt and replace it with the new one, then reassemble all components in reverse order.


Updated on 31 May 2026 by ScegliAuto


Related tutorials

(Various brands) Various Disconnect and lift the bonnet, then disconnect the battery cables. The drive belt will likely be located on one of the two shorter sides of the engi…
(Various brands) Various If you notice unusual noises when starting the engine or during operation, it is necessary to replace the Poly V belt. To perform this operation, rem…
(Various brands) Various This type of belt replacement is the same for all scooters. The belt should be replaced at 9,320 miles (15,000 km). Purchase a new original belt. The…

How to Change the Engine Oil of the Piaggio Liberty 125?

To change the engine oil of the Piaggio Liberty 125, loosen the oil drain plug located at the central lower area of the bike, near the exhaust. By unscrewing the plug, you can collect the used oil in a suitably positioned container. Above the drain plug, you will also find the oil filter, which needs to be removed from its housing and replaced with a new spare part. After the replacement, top up by adding oil through the designated breather.

Watch the video!


by ScegliAuto

More videos