Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
First, remove the seat of the motorcycle to work underneath it. Now, disconnect the connector for the fuel pump, as shown in the video. Start the engine, which will run for only a few seconds before shutting off, as it will obviously run out of fuel. This will empty the fuel line, making it ready to be disconnected. To disconnect it, press down on the fitting and then pull it upwards. It's that simple! Perform your maintenance and then reverse the steps to reconnect everything.

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

From theory to practice: the bore/stroke ratio
From theory to practice: the bore/stroke ratio
(Various brands) Various .. we try to understand some things about the bore/stroke ratio: the square, undersquare or oversquare engine. To know what type of engine we have, we need.. …
Procedure to Bleed Air Trapped in the Diesel Fuel System
Procedure to Bleed Air Trapped in the Diesel Fuel System
(Various brands) Various In this video tutorial, you can see the procedure to bleed air trapped in the diesel fuel system. If air remains in the fuel system, it will be impos…
What happens if we put the wrong fuel in the tank?
What happens if we put the wrong fuel in the tank?
(Various brands) Various What happens if you put the wrong fuel in? Scenario 1: petrol in a diesel engine. This is the most serious scenario, as petrol is drier than diesel a…

How to Replace the Rear View Mirror on a Honda Forza

To replace the rear view mirror on a Honda Forza, use a screwdriver to lever under the front cover of the fairing to detach it. Underneath, you will find the bolts securing the windscreen and its support: by removing these, you can access the screws holding the rear view mirror. Unscrew these screws and disconnect the connectors attached to the mirrors, allowing you to completely remove them and install the new ones: these must be connected to the connectors, positioned in their place, and secured with the appropriate bolts.

Watch the video!


by ScegliAuto

More videos