Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
After placing the motorcycle on a stand on a stable surface for safety, unscrew the screws securing the lower engine guard (the bash plate). Open the oil filler cap and place a container under the drain hole, then unscrew the bolt to let the old oil drain out. Close the hole and pour new oil into the filler. Replace the spark plug if necessary and remove the air filter to wash it with regular detergent. Reassemble everything and you're done!

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Air Filter on a Husaberg/Husqvarna Motorcycle
Replacing the Air Filter on a Husaberg/Husqvarna Motorcycle
(Various brands) Various Remove the side rear plastic by pulling it with your hands and shaking it slightly to release it from the clips holding it in place. The air filter i…
How to Replace the Engine Air Filter on a Scooter
How to Replace the Engine Air Filter on a Scooter
(Various brands) Various How to replace the engine air filter on a scooter? Follow this guide to proceed with the replacement. Position the scooter on its centre stand. Using…
How to Set the Clock on Beverly 300 Scooter
How to Set the Clock on Beverly 300 Scooter
(Various brands) Various In this video tutorial, you can see how to set the clock on the Beverly 300 scooter. For safety reasons, the clock can only be set when the vehicle i…

    Frequently Asked Questions

    • Vari - How much oil is needed for the Harley-Davidson Fat Boy? Read answer
    • Vari - What does the "Oil Insp" message mean? Read answer

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos