Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Clock on Beverly 300 Scooter

Model: (Various brands) Various
Part: Clock

In this video tutorial, you can see how to set the clock on the Beverly 300 scooter. For safety reasons, the clock can only be set when the vehicle is stationary. This setting method is also valid for the latest version. Turn the key to switch on the ignition; position it to "ODO" by pressing the "MODE" button; while holding the "MODE" button for more than three seconds, the hours will be displayed. The hours will increment with each press of the "MODE" button. Once the hours are set, by holding the "MODE" button for more than three seconds, the minutes will be displayed, which will increment with each press of the "MODE" button. If no button is pressed for more than three seconds, you will exit the setting mode.

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on Piaggio Beverly 300/400 HPE
How to Reset the Service Light on Piaggio Beverly 300/400 HPE
(Various brands) Various Resetting the service light on Piaggio Beverly 300/400 HPE models is a very simple operation. Start by placing the scooter, turned off, on its stand …
How to Open the Seat of the Piaggio Beverly 300 Without the Battery
How to Open the Seat of the Piaggio Beverly 300 Without the Battery
(Various brands) Various In this video, you will learn how to open the seat of the Piaggio Beverly 300 without the battery. The operation is very simple. Once you confirm tha…
How to Replace the Remote Battery of the X-Max 300 Scooter
How to Replace the Remote Battery of the X-Max 300 Scooter
(Various brands) Various In this tutorial, you will see how to replace the remote battery of the X-Max 300 scooter. The first step is to purchase a new battery (CR 2032 3V). …

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos