Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Clock on a Piaggio Beverly?

Model: (Various brands) Various
Part: Clock

If you need to change the time on the clock located on the instrument panel of this scooter, you can find the procedure in this description and also refer to the video tutorial. The first step is to turn on the ignition; the clock is located at the bottom of the dashboard on the left side. Locate the "Mode" button on the right-hand side of the handlebars and press it multiple times until the hour is selected and the field to be modified starts to flash. Press the same button repeatedly to change the hour and set the new value. Finally, follow the same procedure to adjust the minutes.

Updated on 7 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Clock on Beverly 300 Scooter
How to Set the Clock on Beverly 300 Scooter
(Various brands) Various In this video tutorial, you can see how to set the clock on the Beverly 300 scooter. For safety reasons, the clock can only be set when the vehicle i…
How to Adjust the Clock on the Piaggio Beverly
How to Adjust the Clock on the Piaggio Beverly
(Various brands) Various If you need to change the time on this motorcycle, the description below provides all the instructions and useful steps to carry out the procedure. F…
How to Reset the Service Light on Piaggio Beverly 300/400 HPE
How to Reset the Service Light on Piaggio Beverly 300/400 HPE
(Various brands) Various Resetting the service light on Piaggio Beverly 300/400 HPE models is a very simple operation. Start by placing the scooter, turned off, on its stand …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos