Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Clock on the Piaggio Beverly

Model: (Various brands) Various
Part: Clock

If you need to change the time on this motorcycle, the description below provides all the instructions and useful steps to carry out the procedure. First, insert the key into the ignition and turn on the ignition. Press the Mode button located on the right side of the handlebars and hold it until the time display starts to flash. Then, press the same button multiple times to scroll through the hours. Once the correct time is set, press the button again to save it. Follow the same procedure to adjust the minutes.

Updated on 1 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Clock on a Piaggio Beverly?
How to Set the Clock on a Piaggio Beverly?
(Various brands) Various If you need to change the time on the clock located on the instrument panel of this scooter, you can find the procedure in this description and also …
How to Reset the Service Light on Piaggio Beverly 300/400 HPE
How to Reset the Service Light on Piaggio Beverly 300/400 HPE
(Various brands) Various Resetting the service light on Piaggio Beverly 300/400 HPE models is a very simple operation. Start by placing the scooter, turned off, on its stand …
How to Set the Clock on Beverly 300 Scooter
How to Set the Clock on Beverly 300 Scooter
(Various brands) Various In this video tutorial, you can see how to set the clock on the Beverly 300 scooter. For safety reasons, the clock can only be set when the vehicle i…

Other guides you may be interested in

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos