Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Vari Altri
    3. : Vari Altri Vari
To change the motor oil of a CFMOTO IBEX 800, start by warming up the engine for a few minutes to fluidify the oil. Turn off the engine and place the motorcycle on a central stand to ensure stability. Locate the oil drain plug under the engine. Place a collection container under the drain plug and unscrew the plug using an appropriate wrench, allowing the old oil to completely drain out. After the oil has been completely drained, reassemble and tighten the drain plug securely. Find the oil fill cap on the side of the engine and remove it. Use a funnel to slowly pour the recommended amount of new oil, as indicated in the owner's manual. Make sure not to exceed the maximum level. Once the new oil has been poured, screw the fill cap back on and tighten it securely. Start the engine and let it run for a few minutes to allow the oil to circulate. Check for any oil leaks. This process will ensure that the engine of your CFMOTO IBEX 800 operates optimally with fresh oil.

Posted on 15 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to change the motor oil of a CFMoto 450SS?
How to change the motor oil of a CFMoto 450SS?
Cfmoto 450ss To change the engine oil of a CFMoto 450SS, start by warming up the engine for a few minutes to make the oil more fluid. Turn off the engine and plac…
How to change the motor oil of a CFMOTO 450MT?
How to change the motor oil of a CFMOTO 450MT?
450 Mt To change the motor oil of a CFMOTO 450MT, start by warming up the engine for a few minutes to fluidize the oil. Next, turn off the engine and lift t…
How to change the motor oil of a MV Augusta F3 800?
F3 800 To change the motor oil of an MV Augusta F3 800, start by placing the motorcycle on a flat and secure surface. Start the engine and let it warm up fo…

Replacing the Rear Light on a Harley Davidson Street Glide

In today's tutorial video, we will see how to remove and replace the rear light on a Harley Davidson Street Glide in simple and quick steps. First, place your bike on a stand and move to the rear; then use a socket and spanner to unscrew and remove the nuts found inside the wheel arch, at the height of the rear light, as shown in the video. At this point, disconnect the electrical connector to remove and replace the light with the new one; then reassemble everything, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos