Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Heater Radiator

Model: (Various brands) Various
Part: Heater core

In this task, the part to be replaced is located at the back of the glove compartment in front of the front passenger seat. First, remove the lower clip by unscrewing the bolts that secure it from underneath. Next, open the glove compartment door and unscrew the bolts that secure the upper part of the compartment, allowing you to extract it. Now locate the part to be removed, as indicated in the video, then remove it and disconnect it from the connector that powers it. Proceed with the installation of the new part, and you're done!

Updated on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Heater Radiator in an Aixam Vehicle
How to Replace the Heater Radiator in an Aixam Vehicle
(Various brands) Various Replacing the heater radiator in an Aixam is a straightforward and quick operation. The steps to follow are: - open the front bonnet; - remove the co…
Removing the Heating Radiator from a Lorry
Removing the Heating Radiator from a Lorry
(Various brands) Various In this video tutorial, learn how to remove the heating radiator from lorries and heavy vehicles: the procedure is quite similar for many models of t…
How to use a thermal camera to identify heating problems in a car
How to use a thermal camera to identify heating problems in a car
(Various brands) Various In this video we can see how to use a thermal camera to check for any issues regarding the heating or air conditioning system of a car. Maybe it is a…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos