Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Various
    4. : How to replace the cabin heating radiator on an Aixam vehicle

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Passenger compartment heating radiator
Operation: How to replace the cabin heating radiator on an Aixam vehicle

Replacing the cabin heating radiator of the Aixam is a simple and quick operation. The steps to be followed are: -open the front hood; -remove the cover; -remove the radiator fastening nuts; -disconnect the connector; -extract the radiator from its housing; To install a new heating radiator, the steps to be followed are the same but done in reverse. Therefore, let's insert the radiator, connect the connector, and tighten the nuts, close the cover, and then the front hood. All that's left is to check its operation by starting the vehicle.


Posted on 29 January 2024 by ScegliAuto

    Frequently Asked Questions

    • Vari - How many amps is the hot air fuse from? Read Answer
    • Vari - When does the car heater not work? Read Answer
    • Vari - How much does it cost to replace my car's heating radiator? Read Answer
    • Vari - How much does it cost to replace the heating radiator? Read Answer
    • Vari - Why doesn't the water inside the passenger compartment heat up? Read Answer
    • Vari - What to do if the passenger compartment of the car does not heat up? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos