Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to adjust tire pressure

Model: (Various brands) Various
Part: Checks and maintenance

Today we will explain how to adjust the tire pressure of your vehicle. Tire pressure should be checked at least once every three months, especially if we use the car for long daily trips. Information on the correct pressure is available in the vehicle's user manual and maintenance manual or on labels affixed along the inner side of the door on both the passenger side and the driver's side. Therefore, we open the tire valve and using a pressure gauge and an air compressor, we adjust the pressure.

Posted on 6 December 2024 by ScegliAuto

Video tutorial

Related tutorials

What does the TPMS light indicate on a vehicle?
What does the TPMS light indicate on a vehicle?
(Various brands) Various The TPMS warning light is used to indicate that the tire pressure of a vehicle needs to be adjusted. When the light comes on, it means that the senso…
How to Inflate Car Tyres?
(Various brands) Various Adjusting tyre pressure is a task that can be done independently at any petrol station. The important thing is to carefully follow the instructions i…
How to Replace the Tyre Pressure Sensors on Your Vehicle
How to Replace the Tyre Pressure Sensors on Your Vehicle
(Various brands) Various When the tyre pressure warning light activates on a vehicle, it means you need to check the tyre pressures and adjust them using an air compressor an…

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - Why doesn't the Becker Map Pilot start? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos