Do it yourself
Frequently asked questions about cars and motorcycles

How to Find the ACC 12 Volts Power Source in the Fuse Box

Model: (Various brands) Various
Part: Fuse box

Video tutorial

In this video, you can see how to find the ACC 12 Volts power source in your car's fuse box: for example, if you need to install daytime running lights, each wire has labels indicating where it should be connected: the black wire to ground, the yellow to the indicator, and the red to the ACC, so you need to identify its position in the fuse box. Connect the black wire to ground, open the fuse box to locate the ACC, which is the accessory power position, only active when the engine is running, but for testing, the engine must be off and the key removed.

Take the red wire and touch it to the empty positions.

If the DRL lights up, it means it is not an ACC. If you do not find any position, you need to remove one of the less important relays and use pin number 1 as the ACC position. The wire comes with a pin, which in this case should be cut to connect it to the relay pin. Start the engine to test, which should be successful.


Updated on 16 November 2026 by ScegliAuto


Related tutorials

(Various brands) Various To install an alarm system in your car, connect the positive and negative power cables of the alarm siren to the car battery or another 12-volt power…
(Various brands) Various In this video, learn how glow plugs work in diesel engines: at the end of the component, there is an electrode that reaches a temperature of 850/900°…
(Various brands) Various To perform this diagnosis, ensure the battery and belt are in good condition. Connect a voltmeter to the battery and measure the resting voltage. Tur…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Where is the washer pump fuse located? Read answer
    • Vari - What is the "WSW" fuse? Read answer
    • Vari - What to do when your car air conditioning fuse is blown? Read answer
    • Vari - Where is the fuse of a RV refrigerator located? Read answer
    • Vari - Where are the fuses located on a Ligier X-Too? Read answer
    • Vari - Where is the tailgate fuse located? Read answer
    • Vari - Where is the battery alternator fuse located? Read answer

How to Reset the Tyre Pressure Light on the Hyundai i20

These brief instructions will show you how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai i20. Before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get inside the cabin and turn on the ignition. Now, press and hold the TPMS reset button located on the left side of the driver's seat until the tyre pressure light resets on the instrument panel, as shown in the video. At this point, turn off the ignition and start the engine to complete the process!

Watch the video!


by ScegliAuto

More videos