Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install a SKF universal constant velocity joint boot

Model: (Various brands) Various
Part: CV boot

Video tutorial

In this video we can see how to mount the universal SKF driveshaft boot: we remove the clamp that tightens the boot we want to change, both in the front and in the back; then to remove the boot, we can cut it. It is necessary to use a special tool that expands the boot to its maximum width, allowing for a perfect fit to the driveshaft.

After positioning it, all that remains is to put the clamps back in place on the front side, coat the inside of the driveshaft with the appropriate grease, which is part of the boot kit, and then tighten the bottom part of it with the larger clamp, and our work will be finished.


Posted on 18 February 2025 by ScegliAuto


Related tutorials

How to program a universal car remote
How to program a universal car remote
(Various brands) Various You may have wondered if a universal car remote exists, and yes, it does. It behaves like a regular remote, so you will need to replace the battery w…
How to replace an SKF timing belt and water pump
How to replace an SKF timing belt and water pump
(Various brands) Various In this video we replace the timing belt, starting from the perspective of the belt and not of the car to which it must be replaced. In fact, it is a…
How to Install a TPMS on a Motorcycle
How to Install a TPMS on a Motorcycle
(Various brands) Various On a motorcycle, the tyre monitoring system is perhaps more necessary than on a car. Let’s see how to install it. The one recommended by the YouTuber…

How to Set the Time in an Audi A4?

In this tutorial, you will see how to set the time in an Audi A4, a very simple and quick operation to perform after replacing the battery or when the time changes. First, insert the key and turn on the instrument cluster. Then, press the "SETUP" button located on the center console. Next, press the upper left arrow button, navigate to the "Time" option, and use the central knob to adjust the clock. Finally, set any necessary formats and save by returning to the main screen.

Watch the video!


by ScegliAuto

More videos