Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Kymco Downtown 300i?

Model: (Various brands) Various
Part: Service warning light

The video guide offered here is a great help for all those who intend to independently change the engine oil and filter. Once this work is completed, we will then need to reset the Service light and to do this we must do the following: Turn on the instrument panel, press the Adj button and display the partial kilometers. Then turn off the aforementioned panel, hold down the Adj and Mode buttons simultaneously and turn on the panel again, waiting a few seconds for the reset process to occur. There you go, the job is done.

Posted on 17 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on the Kymco DownTown 300i ABS
How to Reset the Oil Light on the Kymco DownTown 300i ABS
(Various brands) Various To reset the injection light on the DownTown 300i, first, turn off the engine and the ignition. Once done, twist the throttle for ten seconds. After …
How do you reset the service light on the Kymco Downtown?
How do you reset the service light on the Kymco Downtown?
(Various brands) Various The Kymco Downtown scooter is subject, as it should be, to regular and periodic maintenance. Among the various tasks to be performed, certainly the s…
How to Replace the Spark Plug on the Kymco Downtown 300i
How to Replace the Spark Plug on the Kymco Downtown 300i
(Various brands) Various If you need to replace the spark plug on this scooter, you can find simple instructions in the description below and also refer to the video tutorial…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - What does the Service light on the KTM Duke 200 indicate? Read answer
    • Vari - How do you reset the Service light on an Aixam? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos