Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plug on the Kymco Downtown 300i

Model: (Various brands) Various
Part: Spark plugs

If you need to replace the spark plug on this scooter, you can find simple instructions in the description below and also refer to the video tutorial. First, open and flip up the seat; under it is the engine, and on the left side, you can locate the spark plug cap, which you can remove. Then take a socket wrench to loosen, unscrew, and extract the spark plug itself. Next, take the new spark plug, insert it into the housing, and proceed to screw it back in before finally refitting the cap.

Updated on 7 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on the Kymco DownTown 300i ABS
How to Reset the Oil Light on the Kymco DownTown 300i ABS
(Various brands) Various To reset the injection light on the DownTown 300i, first, turn off the engine and the ignition. Once done, twist the throttle for ten seconds. After …
How to Replace the Spark Plug of the Kymco Xciting S400
(Various brands) Various Although replacing the spark plug of the Kymco Xciting S400 may seem like a lengthy task to do on your own, the process, while laborious, is very sat…
How do you reset the service light on the Kymco Downtown?
How do you reset the service light on the Kymco Downtown?
(Various brands) Various The Kymco Downtown scooter is subject, as it should be, to regular and periodic maintenance. Among the various tasks to be performed, certainly the s…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos