Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on the Kymco DownTown 300i ABS

Model: (Various brands) Various
Part: Service warning light

To reset the injection light on the DownTown 300i, first, turn off the engine and the ignition. Once done, twist the throttle for ten seconds. After ten seconds, release the throttle and wait five seconds. Next, turn the key to switch on the ignition and wait ten seconds. After this, twist the throttle fully again for ten seconds. Now, release the throttle and wait five seconds. Finally, turn off and then turn on the ignition to check if the reset has been successful.

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the service light on the Kymco Downtown?
How do you reset the service light on the Kymco Downtown?
(Various brands) Various The Kymco Downtown scooter is subject, as it should be, to regular and periodic maintenance. Among the various tasks to be performed, certainly the s…
How do you reset the Service light on the Kymco Downtown 300i?
How do you reset the Service light on the Kymco Downtown 300i?
(Various brands) Various The video guide offered here is a great help for all those who intend to independently change the engine oil and filter. Once this work is completed,…
How to Replace the Spark Plug on the Kymco Downtown 300i
How to Replace the Spark Plug on the Kymco Downtown 300i
(Various brands) Various If you need to replace the spark plug on this scooter, you can find simple instructions in the description below and also refer to the video tutorial…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - What does the Service light on the KTM Duke 200 indicate? Read answer
    • Vari - How do you reset the Service light on an Aixam? Read answer

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos