Do it yourself
Frequently asked questions about cars and motorcycles

How to Test a Relay

Model: (Various brands) Various
Part: Fuse box

In this video, we will look at two simple methods to test the functionality of relays: the first is to use a multimeter set to 200 Ohms. Take the leads and connect them to the positive and negative terminals of the relay. We are only measuring Ohms, so it doesn't matter which leads we connect; what we want to see on the display is a number between 50 and 200. If we don't have a multimeter, a simple way to perform the test is to use a 12-volt battery and our relay, doing the same thing by connecting the ground and the negative. What we are interested in is hearing a "click", which means the switch is doing its job.

Updated on 29 January 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various The relay, like the fuse, is an electrical component used in cars to control the power loads of certain components. In today's video, we will see how…
(Various brands) Various In this video, we will see the simplest and most economical method to test your relays: no expensive equipment is needed. For the first method, you w…
(Various brands) Various If you need to test a relay in your car without a multimeter, a YouTuber demonstrates a simple and practical method that allows you to check if the r…

    Frequently Asked Questions

    • Vari - Where is the fuse box located on the Vespa GTS 125? Read answer
    • Vari - What is the "WSW" fuse? Read answer
    • Vari - What is the front wiper fuse? Read answer
    • Vari - Where are the fuses located on a Ligier X-Too? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos