Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

The Easiest Way to Test Your Relays

Model: (Various brands) Various
Part: Fuse box

In this video, we will see the simplest and most economical method to test your relays: no expensive equipment is needed. For the first method, you will need a simple multimeter, which can be found on eBay, for example, under code 326539418173 for £9.90 with free delivery. On the relay, there is a positive pin and a negative pin: these pins are numbers 85 and 86. Test these two pins; you should obtain a resistance between 50 and 150 Ohms. Another method is to take your relay and a 12-volt battery, connecting the negative to pin 86 and the positive to pin 85: you should hear the relay clicking as it activates and deactivates.

Posted on 6 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Test a Relay
How to Test a Relay
(Various brands) Various In this video, we will look at two simple methods to test the functionality of relays: the first is to use a multimeter set to 200 Ohms. Take the lea…
How to Build a Fuse Panel for Any Car
How to Build a Fuse Panel for Any Car
(Various brands) Various Building a fuse and relay panel is much simpler than we think; you need basic equipment: a fuse holder strip, relays, connectors and wires, a heat gu…
The Easiest Way to Top Up Engine Oil
The Easiest Way to Top Up Engine Oil
(Various brands) Various In this video, learn how to easily top up engine oil when necessary and without a funnel. Pouring oil into the engine oil reservoir without a tool to…

    Frequently Asked Questions

    • Vari - Where is the fuse box located on the Vespa GTS 125? Read answer
    • Vari - What is the "WSW" fuse? Read answer
    • Vari - What is the front wiper fuse? Read answer
    • Vari - Where are the fuses located on a Ligier X-Too? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos