Do it yourself
Frequently asked questions about cars and motorcycles

Injector Revision Process

Model: (Various brands) Various
Part: Fuel injectors

Video tutorial

In this video, we will see the procedure for revising injectors: start by removing the coil, spring spacers, and magnet. Next, remove the components, which involves taking off the "fungo" and spacers.

Consequently, loosen the valve nut and discard the old valve. The black spots you notice are pump shavings, a sign of general wear.

Insert the new Teflon gasket, then the new valve, which is tightened, followed by the new "fungo" that is mounted after finding the correct spacer. Check the operation and calibration on the bench and generate the new IMA code after a successful test.

Now the injector is ready to be reinstalled. In the video, they refer to the "fungo" as a part whose technical name would be "needle" or "shutter."


Posted on 29 September 2026 by ScegliAuto


Related tutorials

(Various brands) Various If you need to maintain and clean the LPG injectors on your car, follow the instructions below and refer to the video images for assistance. First, o…
(Various brands) Various Cleaning the injectors independently is possible using spray and an air compressor. After removing the injectors, insert the air compressor into the …
(Various brands) Various After diagnosing the steering column, the "torque sensor" error is often found, leading to the common question: "what do we do now?" Replacing just t…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

What does the "Code 82" message indicate in the Chevrolet Orlando and how to remove it?

If the "Code 82" message appears on the dashboard of your Chevrolet Orlando, it means that the service interval in miles or time has been reached. Once all scheduled maintenance tasks are completed, you can remove the warning by following the simple procedure shown in this tutorial. First, insert the key and turn on the ignition, then press the "MENU" button located on the left control stalk and navigate to the screen displaying the "Reset" option. At this point, press the "SET/CLR" button at the end of the same stalk and confirm the reset.

Watch the video!


by ScegliAuto

More videos