Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Clean the LPG Injectors on a Car

Model: (Various brands) Various
Part: Fuel injectors

If you need to maintain and clean the LPG injectors on your car, follow the instructions below and refer to the video images for assistance. First, open the bonnet, locate the injector rail, and remove its securing screws, then disconnect the feed connectors. Next, disconnect the gas supply pipes by loosening the clips. At this point, the injector assembly is removed and can be extracted. For cleaning, use some petrol, which will also act as a lubricant. Finally, reassemble everything in reverse order.

Updated on 7 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Clean Car Injectors
How to Clean Car Injectors
(Various brands) Various Here’s how to clean car injectors. Lift the bonnet and secure it with the prop rod, then disconnect the fuel supply hose that leads to the injectors.…
How and When to Replace the LPG Cylinder in Cars
How and When to Replace the LPG Cylinder in Cars
(Various brands) Various This video tutorial explains how and when it is necessary to replace the LPG cylinder in cars. First, you need to know that if the LPG system is fact…
How to Clean Injectors with WD-40
How to Clean Injectors with WD-40
(Various brands) Various In this video, see how to clean injectors with WD-40, and the procedure is the same for any type of propulsion: petrol, diesel, methane, or LPG. For …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos