Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reprogram a Nice remote control

Model: (Various brands) Various
Part: Checks and maintenance

Video tutorial

To program a new Nice remote control using an already functioning one, stand close to the receiver (in front of the gate), as the new remote "inherits" the settings from the old one via the receiver. The classic procedure is as follows: on the new remote, press and hold the button to be programmed for about 5-8 seconds (the exact time varies: 7 seconds for OXI receivers, 5 seconds for other models), then release it. Immediately after, on the previously stored old remote, press the same button three times slowly.

Finally, on the new remote, press the button once more to confirm. The receiver should give a confirmation signal (LED flashing or sound).

The function can be disabled by the installer on the receiver, so if the sequence does not start, it is not the battery's fault. Additionally, the new remote must be from the same coding family as the old one (e.g., both FloR or both O-Code), otherwise the receiver will not accept it. If the "remote" procedure does not work, the alternative is to program the new remote directly on the receiver by pressing the "Radio" or "Prog" button on the unit and following the instructions for your specific model.


Posted on 1 November 2026 by ScegliAuto


Related tutorials

How to program the Nice remote control
How to program the Nice remote control
(Various brands) Various Today we will explain how to program a gate remote control. To program a new Nice remote control, you need to use the "old" remote control. To carry …
How to Program a Nice Remote Control
How to Program a Nice Remote Control
(Various brands) Various The procedure described in the video is that of self-learning or duplication used for many Nice remote controls, particularly those with rolling code…
How to Program Nice Remotes in Mode 1?
How to Program Nice Remotes in Mode 1?
(Various brands) Various With the help of the attached video tutorial, you can successfully program a Nice remote quickly and without complicated steps. Here’s what to do: ne…

    Frequently Asked Questions

    • Vari - Does the Sym Symphony 200cc have any known faults or problems? Read answer
    • Vari - What problems does the Keeway K-Light 125 have? Read answer
    • Vari - What are the main problems with the Keeway Superlight 125? Read answer

How to reset the service light on the Kawasaki Versys 1000

Resetting the service light on the Kawasaki Versys 1000 is a straightforward operation that can be done independently, aided by our brief video tutorial. Start the reset procedure by turning on the instrument cluster, then simultaneously press the right and left buttons on the left lever. Once in the menu, select the service option and wait for the reset to load; once completed, press the two buttons again to return to the main menu and restart the instrument cluster to complete the reset of the service light.

Watch the video!


by ScegliAuto

More videos