Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Thermostat on a Car

Model: (Various brands) Various
Part: Thermostat

If the thermostat in your car is faulty, it needs replacing; follow this procedure. Disconnect the hoses leading to the thermostat. Unscrew the bolts on the thermostat housing cap (use a socket wrench with the appropriate sockets), remove the sealing cap, and extract the coolant thermostat from its housing. Once the part is removed, replace it with a new one, close the housing with the cap, and tighten the bolts securely with all its parts. Reconnect the hoses to the new thermostat. Test the car's operation.

Updated on 15 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Car Thermostat
Replacing the Car Thermostat
(Various brands) Various Is the thermostat in your car damaged? Let’s see how to remove the part. Lift the front cover bonnet and uncover the engine from its soundproofing pa…
Replacing the Thermostat
Replacing the Thermostat
(Various brands) Various Learn how to replace the car thermostat. Lift the front bonnet and start disassembling the air filter housing. Remove the coil pack: there are fasten…
How does a car's thermostat work?
How does a car's thermostat work?
(Various brands) Various This video shows us how the physical principle of the thermostat works, which is an example of a heat transformer into mechanical motion. When cold, …

    Frequently Asked Questions

    • Vari - Why doesn't the radiator fan turn off? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos