Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Thermostat

Model: (Various brands) Various
Part: Thermostat

Learn how to replace the car thermostat. Lift the front bonnet and start disassembling the air filter housing. Remove the coil pack: there are fastening screws to take off. Unscrew the bolts on the thermostat hose cap as shown in the video (use a socket wrench with the appropriate sockets), pull off the sealing cap and extract the thermostat from its housing. Once the part is removed, replace it with a new one, close the designated area with the cap, and tighten the fastening bolts securely. Reinstall the coil pack and the air filter housing.

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Thermostat on a Car
How to Remove the Thermostat on a Car
(Various brands) Various If the thermostat in your car is faulty, it needs replacing; follow this procedure. Disconnect the hoses leading to the thermostat. Unscrew the bolts…
Replacing the Car Thermostat
Replacing the Car Thermostat
(Various brands) Various Is the thermostat in your car damaged? Let’s see how to remove the part. Lift the front cover bonnet and uncover the engine from its soundproofing pa…
How does a car's thermostat work?
How does a car's thermostat work?
(Various brands) Various This video shows us how the physical principle of the thermostat works, which is an example of a heat transformer into mechanical motion. When cold, …

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Why doesn't the radiator fan turn off? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos