Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Car Courtesy Lights

Model: (Various brands) Various
Part: Interior dome light bulb

Video tutorial

Let’s see how to remove the car's courtesy lights. Remove the transparent cover to replace the bulbs or to take down the entire light unit.

Pry between the light unit and the headlining panel (without breaking anything), and pull the cover out from the light unit. Replace the damaged bulb with a new one (same size and voltage).

Unscrew the securing screws if you want to remove the entire light unit. Refit the light unit in its housing and screw in the securing screws.

Push the transparent plastic with your hands until the side tabs are fully locked. Test the correct operation of the lights.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

Where Are the Fuses on the Scania R450?
(Various brands) Various The fuses on the Scania R450 are located inside the single fuse box installed within the vehicle: in this type of vehicle, you can find this box insi…
Types of Positive Cables in Cars
Types of Positive Cables in Cars
(Various brands) Various There are different types of positive cables in a car: those that are always live (even with the engine off) that power devices that must always func…
How to Properly Use Your Car Lights
How to Properly Use Your Car Lights
(Various brands) Various This video provides guidance applicable to most vehicles, teaching you how to correctly use the lights on your car. Generally, there is a white line …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos