Do it yourself
| ||||
|
(Various brands) Various - Video tutorial
Model: (Various brands) Various
In order to replace the windshield washer pump on the Nissan Armada, the hood must be opened to gain access to the engine compartment. The pump will be located in correspondence with the left front headlight, in its rear part and connected to a connector. Before removing the pump, the aforementioned connector must be disconnected. It will then be possible to loosen the bolts that secure the washer fluid reservoir to its housing and remove it. Once the tank has been removed, the pump can be removed and replaced. At the end of the operation it will be possible to assemble all the parts previously removed.
Posted on 1 March 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.128
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |