Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What the Water Pump Does and Symptoms of Failure

Model: (Various brands) Various
Part: Pump

The water pump maintains the correct operating temperature and regulates heat exchange between the interior and exterior through the radiator. A malfunction can lead to premature wear of mechanical parts, a risk of seizing, and burning of the head gasket. Inside the pump is the coolant, which lowers the freezing point and raises the boiling point. This captures excess heat and prevents corrosion. Symptoms of malfunction include frequent increases in engine temperature, coolant leaking outside the pump or onto the ground, and high-pitched, squealing sounds from the engine bay. Replacing the part can be very costly, so do not underestimate the warning signs from your vehicle. If you do need to replace it, remember to change the thermostat as well. It only costs a few pounds, but then you won’t have to think about it again.

Updated on 25 August 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

What are the symptoms to identify faults in the ignition coil?
What are the symptoms to identify faults in the ignition coil?
(Various brands) Various In this video we show the symptoms that indicate when the ignition coils of our car are faulty. First of all, it presents ignition problems, and cons…
What are the symptoms of a damaged brake pump?
What are the symptoms of a damaged brake pump?
(Various brands) Various In this video, we can see what are the symptoms of a damaged brake pump: the most common is when we press the pedal, it goes all the way down and we …
What Are the Symptoms of a Dirty Fuel Filter?
(Various brands) Various How can you tell if a fuel filter is dirty? This video shows the symptoms your vehicle may exhibit if this component is clogged with dirt. Whether th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos