Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Windscreen from a T-Max 500 Scooter

Model: (Various brands) Various
Part: Windshield

Removing the windscreen from the T-Max 500 scooter has never been so simple thanks to our video tutorial that will show you how to perform this straightforward operation in just a few minutes. The tools required for this disassembly operation are: a star screwdriver, a 4mm Allen key, a 3mm Allen key, and a 10mm spanner. Start by removing all the screws around the windscreen with the 4mm Allen key, as shown in the video. Now, extract the central part of the scooter to access the screws of the windscreen, which you will remove using the 3mm Allen key. Once this is removed, you can carry out any work you wish to perform, such as changing the air filter.

Updated on 27 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Windscreen on a Kymco Scooter
How to Remove the Windscreen on a Kymco Scooter
(Various brands) Various In this video tutorial, you can see how to remove the windscreen from the Kymco People scooter. Start by unscrewing the windscreen screws using a 6 m…
How to Install a Windscreen on a Scooter
How to Install a Windscreen on a Scooter
(Various brands) Various If you want to install a windscreen on a scooter, you can find the instructions below and also refer to the video. After purchasing the aftermarket a…
How to Replace the Rear Bulb of the Tmax 500?
How to Replace the Rear Bulb of the Tmax 500?
(Various brands) Various To replace the rear bulb of the scooter's headlamp, follow these steps: first, open and flip the seat, then remove the screws securing the rear mudgu…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos