Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Bulb of the Tmax 500?

Model: (Various brands) Various
Part: Tail light bulb

To replace the rear bulb of the scooter's headlamp, follow these steps: first, open and flip the seat, then remove the screws securing the rear mudguard from the inside. From above, you can access the wiring and the electrical connector for the headlamp bulb, which needs to be disconnected. At this point, you can remove the bulb and replace it with one of the same specifications. If necessary, you can also replace the rear indicator lights at the same time.

Updated on 27 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear wheel of the Tmax 500
How to remove the rear wheel of the Tmax 500
(Various brands) Various To remove the rear wheel of the motorcycle, proceed as follows: use a socket wrench to loosen the rear wheel axle (left side of the motorcycle). Take…
How to Remove the Windscreen from a T-Max 500 Scooter
How to Remove the Windscreen from a T-Max 500 Scooter
(Various brands) Various Removing the windscreen from the T-Max 500 scooter has never been so simple thanks to our video tutorial that will show you how to perform this strai…
How to replace the rear headlight bulb of a car
How to replace the rear headlight bulb of a car
(Various brands) Various Replacing the bulb of the left rear headlight of the car is a very simple and quick operation to perform independently, and this operation is similar…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos