Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Bulb

Model: (Various brands) Various
Part: License plate light

Learn how to replace the number plate light bulb. Remove the number plate light unit located in the rear bumper of the vehicle. Pry at the sides of the plastic of the light unit until it detaches. Once the light unit is removed, extract the bulb holder by hand, then disconnect the bulb from it. Fit the new LED bulb (same size and voltage), inserting it into the bulb holder, then refit the light unit into the tailgate pressing it until the clips lock automatically. After securing the light units in their designated housing, test their operation.

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Number Plate from Your Car
How to Remove the Front Number Plate from Your Car
(Various brands) Various How do you remove the front number plate from your car? It's a really easy task. Let's see how to remove and fit the number plate. Take a screwdriver…
How to Fit a Number Plate Using a European Number Plate Holder
How to Fit a Number Plate Using a European Number Plate Holder
(Various brands) Various Here’s how to fit a number plate in European format using a number plate holder. Obtain a European format number plate holder like the one shown in t…
Fitting the Rear Number Plate Holder on Our Car
Fitting the Rear Number Plate Holder on Our Car
(Various brands) Various Do you have the number plate holder in pieces? Let’s see how to replace the rear number plate holder on the car. Remove the securing screws of the nu…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos