Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit a Number Plate Using a European Number Plate Holder

Model: (Various brands) Various

Here’s how to fit a number plate in European format using a number plate holder. Obtain a European format number plate holder like the one shown in the video. Remove the bottom bar and insert the number plate from the bottom upwards. Slightly curve the number plate holder and plate to match the shape of the bumper. Then remove the plate and rest the holder against the bumper; using the holes provided, insert the screws and tighten them with a screwdriver. Once the fitting is complete, you can insert the plate from the bottom upwards. Next, insert the bottom strip under the plate; you have now completed the job by securing the plate to the car.

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Fitting the Rear Number Plate Holder on Our Car
Fitting the Rear Number Plate Holder on Our Car
(Various brands) Various Do you have the number plate holder in pieces? Let’s see how to replace the rear number plate holder on the car. Remove the securing screws of the nu…
How to Remove the Front Number Plate from Your Car
How to Remove the Front Number Plate from Your Car
(Various brands) Various How do you remove the front number plate from your car? It's a really easy task. Let's see how to remove and fit the number plate. Take a screwdriver…
How to Fit a Car Number Plate?
How to Fit a Car Number Plate?
(Various brands) Various The procedure for fitting a car number plate is virtually identical for all vehicles. The plate is secured to the number plate holder with a number o…

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos