Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit a Car Number Plate?

Model: (Various brands) Various
Part: Checks and maintenance

The procedure for fitting a car number plate is virtually identical for all vehicles. The plate is secured to the number plate holder with a number of screws that may vary depending on the car model. All you need for this operation is a screwdriver of the correct size. If you are unsure of the size, use a screwdriver with interchangeable bits, and if you want to make the job easier, use a power screwdriver. The only task is to unscrew the screws of the number plate holder, remove any replacement plate, and fit the new number plate in its place, tightening the screws.

Updated on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rivets Fixing the Number Plate?
How to Remove the Rivets Fixing the Number Plate?
(Various brands) Various To remove the rivets from your car's number plate, you need to use a drill: this should be used to turn the rivets fixing the number plate counterclo…
How to Fit a Number Plate Using a European Number Plate Holder
How to Fit a Number Plate Using a European Number Plate Holder
(Various brands) Various Here’s how to fit a number plate in European format using a number plate holder. Obtain a European format number plate holder like the one shown in t…
How to Remove the Front Number Plate from Your Car
How to Remove the Front Number Plate from Your Car
(Various brands) Various How do you remove the front number plate from your car? It's a really easy task. Let's see how to remove and fit the number plate. Take a screwdriver…

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - Why doesn't the Becker Map Pilot start? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos