Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting the Rear Number Plate Holder on Our Car

Model: (Various brands) Various
Part: Checks and maintenance

Do you have the number plate holder in pieces? Let’s see how to replace the rear number plate holder on the car. Remove the securing screws of the number plate holder; detach it from the bodywork and take out the number plate. Obtain the new part. Fit the number plate into the frame of the number plate holder. Use a screwdriver to tighten the securing screws of the frame (located at the sides of the frame). If you don’t have the screws, you can secure it with metal rivets. Check that the number plate is properly fitted with all screws in place. Perform the same fitting to replace the front number plate holder (if present on your car).

Updated on 15 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Fit a Number Plate Using a European Number Plate Holder
How to Fit a Number Plate Using a European Number Plate Holder
(Various brands) Various Here’s how to fit a number plate in European format using a number plate holder. Obtain a European format number plate holder like the one shown in t…
Fitting the Front Number Plate Holder
Fitting the Front Number Plate Holder
(Various brands) Various This video shows the procedure to follow for fitting the front number plate holder of a car, after having removed it and the European support. Start …
How to Install and Connect the Number Plate Holder with Rear Camera?
How to Install and Connect the Number Plate Holder with Rear Camera?
(Various brands) Various If you want to install the rear camera on the number plate holder along with the parking sensors, you can find instructions on how to connect and mou…

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos