Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install and Connect the Number Plate Holder with Rear Camera?

Model: (Various brands) Various

If you want to install the rear camera on the number plate holder along with the parking sensors, you can find instructions on how to connect and mount it in this description. The package includes all the wiring and the control unit. This control unit needs to be connected to a 12 V power source, such as the rear number plate light. Next, connect the rear sensors and perform a functionality test. After that, proceed to install the new number plate holder in place of the old one and position the control unit and cables appropriately under the boot floor.

Updated on 26 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install a Number Plate Reverse Camera on Any Vehicle
How to Install a Number Plate Reverse Camera on Any Vehicle
(Various brands) Various Today, we will install a number plate reverse camera, which can be fitted to any vehicle. First, go to the back of the car and remove the number plat…
How to Remove the Rivets from the Number Plate Holder
How to Remove the Rivets from the Number Plate Holder
(Various brands) Various In today's video, see how to remove the rivets and detach the number plate holder from a Ducati Panigale. First, get a standard pair of pliers. Start…
How to Remove a Car Number Plate?
How to Remove a Car Number Plate?
(Various brands) Various This video tutorial explains how to remove and reattach a number plate and its holder from a car. First, the operation of removing the number plate f…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos