Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting the Front Number Plate Holder

Model: (Various brands) Various

This video shows the procedure to follow for fitting the front number plate holder of a car, after having removed it and the European support. Start by extracting the plastic clips of the plate using a screwdriver, and then slide it out of the guides to remove it. Next, remove the European support by unscrewing the locking screws, possibly using a battery-powered screwdriver. Once done, perform the reverse operation: clean the bumper in the affected area and first fix the number plate holder using the supplied screws, followed by the number plate itself, securing it with the previously mentioned plastic clips.

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Fitting the Rear Number Plate Holder on Our Car
Fitting the Rear Number Plate Holder on Our Car
(Various brands) Various Do you have the number plate holder in pieces? Let’s see how to replace the rear number plate holder on the car. Remove the securing screws of the nu…
How to Fit a Number Plate Using a European Number Plate Holder
How to Fit a Number Plate Using a European Number Plate Holder
(Various brands) Various Here’s how to fit a number plate in European format using a number plate holder. Obtain a European format number plate holder like the one shown in t…
How to Fit a Car Number Plate?
How to Fit a Car Number Plate?
(Various brands) Various The procedure for fitting a car number plate is virtually identical for all vehicles. The plate is secured to the number plate holder with a number o…

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos