Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the license plate light bulb of a car

Model: (Various brands) Various
Part: License plate light

Today we will explain how to replace the license plate light bulb of Peugeot and Citroen vehicles, as the steps to be performed are the same. You will need to use a Phillips screwdriver and a new bulb. With the screwdriver, unscrew the side screws of the spotlight and then remove it from its housing. Disconnect the connector from the bulb and insert the new one in order to connect the connector and close the spotlight. Screw in the screws and test its operation by turning on the vehicle's lights. The bulb we will use is a 3 Volt bulb, which can also be purchased online.

Posted on 27 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Number Plate Light Bulb
How to Change the Number Plate Light Bulb
(Various brands) Various To change the bulb for the number plate light, you will need a star screwdriver to unscrew the two screws holding the light unit. Remove the bulbs an…
How to Change the Registration Plate Associated with Your Telepass
How to Change the Registration Plate Associated with Your Telepass
(Various brands) Various If you have a Telepass, you have likely downloaded the Telepass app on your smartphone. If you need to change the registration plate on the Telepass …
How to Remove a Car Number Plate
How to Remove a Car Number Plate
(Various brands) Various If you need to remove a number plate from a vehicle (US model), you can find instructions on the operations to perform in this description and with t…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos