Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear wheel of the Tmax 500

Model: (Various brands) Various

To remove the rear wheel of the motorcycle, proceed as follows: use a socket wrench to loosen the rear wheel axle (left side of the motorcycle). Take a 12mm socket to remove the brake caliper and pull it off the disc. Then, extract the wheel axle from the right side and push the rim to the right to remove it from its seat. At this point, the wheel will be off the axle, allowing you to carry out necessary maintenance. To reassemble everything, work in reverse, refitting all the various components.

Updated on 24 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Bulb of the Tmax 500?
How to Replace the Rear Bulb of the Tmax 500?
(Various brands) Various To replace the rear bulb of the scooter's headlamp, follow these steps: first, open and flip the seat, then remove the screws securing the rear mudgu…
How to Remove the Rear Wheel of a Vespa
How to Remove the Rear Wheel of a Vespa
(Various brands) Various If you need to remove the rear wheel of this vehicle, you can find the instructions in this description and also refer to the images in the video. Th…
How to Refit the Rear Wheel of the Yamaha T Max 500
How to Refit the Rear Wheel of the Yamaha T Max 500
(Various brands) Various After removing the rear wheel of the scooter, follow the instructions below to refit it, using the tutorial video as a guide. Take the wheel axle pin…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos