Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Honda
    3. :
  3. Forza
    4. : How to replace the battery in the Honda Forza 300

Model: Honda Forza
Part: Battery
How to replace the battery in the Honda Forza 300

In today's video you will see how to locate the service battery in the Honda midsize scooter, the Forza 300. First park the scooter on the central stand and leave it off for half an hour. Now open the compartment under the saddle with the appropriate command and identify the flap inside it. We proceed with its disassembly by unscrewing the fixing screws and then remove the battery, disconnecting the connectors (first the negative pole and then the positive, as always). If necessary, replace it with a new unit and proceed with the reassembly of the piece. Operation completed.


Posted on 27 April 2024 by ScegliAuto



How to replace the battery of the Honda Forza 300?
Forza In order to replace the battery of the Honda Forza 300 you need to lift the saddle and loosen the bolts that are located at the joint that joins the
How to replace the battery of the Honda Forza 300?
Forza In order to replace the battery of the Honda Forza 300 you have to go and open the compartment under the saddle with the special key, so that the sad
How to replace the mirror of the Honda Forza 300?
Forza In this video we can see the whole procedure that allows us to replace the rear view mirror of a Honda Forza 300. First we fold the mirrors inwards i

How to change the Harley Davidson Street Glide engine oil and relative filter

The guide shows you how to change the Harley Davidson Street Glide engine oil. The first thing to do is to make the motorcycle safe and unscrew the oil tank cap. At this point, from the bottom of the bike, unscrew the drain plug of the oil pan with a 15mm wrench; allow the oil to flow into a suitable container for disposal. From the left side of the bike, start unscrewing the oil filter and place a plastic bag to collect the oil that comes out. Remove the old filter and clean the housing. Lubricate the gasket on the new filter and install a new O-ring on the drain plug and fit the elements in place. Top up the oil to the correct amount and run the engine. Check the oil level again.

Watch the video!


by ScegliAuto

More videos