Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Filter on a Harley Davidson Street Glide

Model: Harley Davidson Street Glide
Part: Engine oil

Video tutorial

This guide shows how to change the engine oil on a Harley Davidson Street Glide. First, secure the motorcycle and unscrew the oil tank cap. Then, from the bottom of the motorcycle, unscrew the drain plug from the oil sump using a 15mm spanner; allow the oil to drain into a suitable disposal container.

On the left side of the motorcycle, begin unscrewing the oil filter and place a plastic bag to catch the outgoing oil. Remove the old filter and clean the housing. Lubricate the gasket of the new filter and install a new o-ring on the drain plug, then reassemble the components.

Refill the oil to the correct level and run the engine. Check the oil level again.


Updated on 28 May 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter on the Harley Davidson Street Glide
How to Change the Engine Oil and Oil Filter on the Harley Davidson Street Glide
Street Glide Engines generally require regular maintenance, which should be performed at regular intervals; here’s how to change the engine oil and oil filter on …
How to Change the Engine Oil on a Harley-Davidson Street Glide
How to Change the Engine Oil on a Harley-Davidson Street Glide
Street Glide In this tutorial, you will see how to change the engine oil on a Harley-Davidson Street Glide, a very simple and quick operation. First, wait until t…
How to Service the Harley Davidson Street Glide
How to Service the Harley Davidson Street Glide
Street Glide This guide covers the main steps to perform a routine service on the Harley Davidson Street Glide, including changing the engine oil and oil filter. …

How to Set the Clock on the Sym Jet14 125?

To adjust the clock on the Sym Jet14 125, turn on the instrument panel by inserting the ignition key into the corresponding slot. Once the panel is on, press and hold the M button located underneath until one of the numbers on the clock starts flashing. At this point, repeatedly press the S button, also located beneath the panel, to change that number. After making the change, press the M button to move on to the next numbers, finishing by turning off the panel.

Watch the video!


by ScegliAuto

More videos