Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial we can see how to replace the engine oil in the Harley-Davidson Street Glide, an extremely simple and quick operation. First of all, we wait for the engine to be cold enough, then we place a container under the bike, locate the drain plug and unscrew it using a 16mm socket wrench. We then let all the oil in the system drain out, unscrew the old filter, and tighten both the replacement filter and the plug. At this point, all that's left to do is to pour in the required amount of oil through the designated hole.

Posted on 7 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Oil Filter on the Harley Davidson Street Glide
How to Change the Engine Oil and Oil Filter on the Harley Davidson Street Glide
Street Glide ..he engine oil and oil filter on the Harley Davidson Street Glide. First, place your bike on the stand and begin unscrewing the oil drain bolt located u.. …
How to Service the Harley Davidson Street Glide
How to Service the Harley Davidson Street Glide
Street Glide .. steps to perform a routine service on the Harley Davidson Street Glide, including changing the engine oil and oil filter. First, place the motorcycle.. …
How to Check the Engine Oil Level on a Harley-Davidson Street Glide?
How to Check the Engine Oil Level on a Harley-Davidson Street Glide?
Street Glide .. how to check the engine oil level on a Harley-Davidson Street Glide, a very simple and quick operation to perform regularly. First, start the engine.. …

How to Replace the Clutch on a Triumph Speed Triple?

To replace the clutch on a Triumph Speed Triple, loosen the bolts securing the covers of the three casings located on the right side of the bike, namely the starter motor, the engine, and then the clutch. Once these covers are removed, you can access the bolts securing the clutch, unscrew them, and slide the clutch plates out of their housing. This will allow you to insert the new plates into their place, securing everything with the appropriate bolts; finally, reinstall all the casings.

Watch the video!


by ScegliAuto

More videos