Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Service the Harley Davidson Street Glide

Model: Harley Davidson Street Glide
Part: Engine oil

Video tutorial

This guide covers the main steps to perform a routine service on the Harley Davidson Street Glide, including changing the engine oil and oil filter. First, place the motorcycle on a stand and start by unscrewing the oil drain bolt located under the engine on the sump, allowing it to drain into a container for about ten minutes.

Next, use the appropriate tool to unscrew the oil filter cartridge, then install and tighten the new one gently, as shown in the video. Finally, top up with new oil!


Updated on 26 June 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on the Harley Davidson Street Glide
How to Replace the Air Filter on the Harley Davidson Street Glide
Street Glide To replace the air filter on the Harley Davidson Street Glide, loosen the screws securing the air filter to its housing located on the right side of …
Replacing the Battery of the Harley Davidson Street Glide
Replacing the Battery of the Harley Davidson Street Glide
Street Glide Today, we will see in this video tutorial how to remove and replace the battery of the Harley Davidson Street Glide motorcycle by following these sim…
How do you replace the rear shock absorber of the Harley Davidson Street Glide?
How do you replace the rear shock absorber of the Harley Davidson Street Glide?
Street Glide To replace the rear shock absorber of the Harley Davidson Street Glide, you need to loosen the screws that hold it to its housing: this can be found …

How to Set the Clock on the Sym Jet14 125?

To adjust the clock on the Sym Jet14 125, turn on the instrument panel by inserting the ignition key into the corresponding slot. Once the panel is on, press and hold the M button located underneath until one of the numbers on the clock starts flashing. At this point, repeatedly press the S button, also located beneath the panel, to change that number. After making the change, press the M button to move on to the next numbers, finishing by turning off the panel.

Watch the video!


by ScegliAuto

More videos