Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a HD Sportster Iron Motorcycle

Model: (Various brands) Various
Part: Headlight bulb

In this video tutorial, you can see how to replace the headlight bulb on a HD Sportster Iron motorcycle. Required materials: H4 12V 65W bulb. The first step is to unscrew the ring around the headlight using a cross screwdriver. Once the ring is removed, you will have access to the glass and the block; from the back, you can remove the bulb. Next, disconnect the connector, remove the rubber, and then remove the spring holding the bulb in place, using a screwdriver if necessary. Once the spring is removed, you can pull out the bulb. Replace the old bulb with the new one and reassemble all parts in reverse order as shown in the video.

Updated on 25 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Front Brake Pads on the HD Sportster Iron
How to Change the Front Brake Pads on the HD Sportster Iron
(Various brands) Various To replace the front brake pads on this motorcycle, follow the instructions in this description and refer to the video. First, loosen the bolts secur…
How to Replace the Rear Headlight Bulb on a Kawasaki Zx14
How to Replace the Rear Headlight Bulb on a Kawasaki Zx14
(Various brands) Various To replace the rear headlight bulb on this motorcycle model, follow the instructions in this description and refer to the video. First, remove the se…
How to replace the rear headlight bulb of a car
How to replace the rear headlight bulb of a car
(Various brands) Various Replacing the bulb of the left rear headlight of the car is a very simple and quick operation to perform independently, and this operation is similar…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos