Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Various
    4. : Reset of the wax and reset of the engine warning light

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Particulate filter
Operation: Reset of the wax and reset of the engine warning light

The video shows how to reset the wax with consequent reset of the engine warning light. The wax is used to guarantee the regeneration of the Particulate Filter. If its value is below the minimum threshold, it must be reset. Disconnect the plug that is connected to the Filter, then unscrew the three bolts with a size 13 wrench to detach the wax tank. Detach the blue refill tube and connect it, using a plastic tube, to the tank which must be positioned correctly. Open the tank tap to top up. Carry out the assembly operations and then start the engine to check that the engine warning light is off.


Posted on 11 July 2022 by ScegliAuto

    Frequently Asked Questions

    • Vari - What does it mean that the regeneration process has not been completed? Read Answer
    • Vari - What to do when the particle filter warning light comes on? Read Answer
    • Vari - How much does wax for Peugeot cars cost? Read Answer
    • Vari - What to do if the exhaust gas warning light comes on? Read Answer
    • Vari - How much does a liter of adblue cost? Read Answer
    • Vari - Why does the exhaust smoke warning light come on? Read Answer
    • Vari - Why does the anti-pollution filter fault come on? Read Answer
    • Vari - What is the engine warning light with adblue indication? Read Answer
    • Vari - How to remove the particulate filter warning light? Read Answer
    • Vari - What problems can fap present in Subaru diesel engines? Read Answer
    • Vari - How much does it cost to change a particulate filter? Read Answer
    • Vari - What does the DPD light indicate in the Isuzu NPR85? Read Answer
    • Vari - What is the particulate filter warning light? Read Answer
    • Vari - How much does it cost to replace the particulate filter? Read Answer
    • Vari - What does the anti-pollution system warning light mean? Read Answer
    • Vari - When does the particle filter warning light come on in Volkswagen? Read Answer
    • Vari - Urea warning light on after when to refuel? Read Answer
    • Vari - Engine failure warning light on Fiat Ducato 2.3 multijet: what can it be? Read Answer
    • Vari - What happens when the particulate filter warning light on Volkswagen passenger cars comes on? Read Answer
    • Vari - Cost of refilling wax? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos