Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Tyre Check and Resetting the Tyre Pressure Warning Light

Model: (Various brands) Various
Part: Tire pressure warning light

The video shows how to perform a DIY tyre check and reset the tyre pressure warning light. This operation is necessary when one or more tyres have a pressure that is too low compared to the reference value; consequently, a yellow warning light appears on the instrument cluster indicating this issue. To inflate the tyres, use a gun with a pressure gauge: connect the gun's hose to the tyre valve and inflate; then, check that the pressure value is as desired. At this point, turn on the ignition and check that the warning light is off.

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tyre pressure warning light on the Nissan NV1500?
How to reset the tyre pressure warning light on the Nissan NV1500?
(Various brands) Various You can reset the tyre pressure warning light on your Nissan NV1500 independently by following this video tutorial. Before proceeding with the reset,…
How to Reset the Tyre Pressure Warning Light in Your Car
How to Reset the Tyre Pressure Warning Light in Your Car
(Various brands) Various This video will show you how to reset the tyre pressure warning light in your car (in this case, it’s a Toyota, but the process is similar for many o…
How to Reset the Tyre Pressure Light on the Vauxhall Viva?
How to Reset the Tyre Pressure Light on the Vauxhall Viva?
(Various brands) Various To reset the tyre pressure light on the Vauxhall Viva, inflate the tyres to the optimal pressure indicated on the sticker affixed to the driver's doo…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos