Do it yourself
Frequently asked questions about cars and motorcycles

Where to Find and How to Replace the Battery in the Yamaha Tricity 125

Model: (Various brands) Various
Part: Battery

This tutorial explains where the battery is located and how to replace it. To access the battery compartment, lift the seat and unscrew the side screws holding the plastic cover; the battery is located under the seat hinge. Once the plastic cover is removed, you will have access to the battery and can proceed with the replacement. Obtain a new battery with a voltage of 12V and 6Ah (always check the user manual or ask the parts dealer for the correct one for your vehicle) and using an Allen key, first unscrew the negative terminal and then the positive terminal. Detach the rubber retaining strap and extract the battery. Install the new one and reverse the steps to reassemble everything. Finally, test the new battery by turning on the engine.

Updated on 4 June 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various The first thing to know is where the aforementioned power battery of the Honda Forza 125 is located. It is located under the moped seat, so by liftin…
(Various brands) Various Replacing the rear tyre on a Yamaha Tricity 155 is a fairly simple task that can be done independently with the help of our short video tutorial. Sta…
(Various brands) Various In this tutorial video, you will see how to replace the battery on a Kymco 125 scooter: the first step is to purchase a new battery with the same amp…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Where is the battery located on the Sym Jet X 125? Read answer
    • Vari - Where is the battery located on the Yamaha Xenter 125? Read answer
    • Vari - Where is the Sym Symphony 125 battery located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos