Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Short and Long Bulbs on a Yamaha X Max 125

Model: (Various brands) Various

To change the bulb on a Yamaha X Max 125, as shown in the video, you will need a 4 mm spanner, a 10 mm spanner, a Phillips screwdriver, and of course, a new bulb. First, remove the front panel where the two bulbs are located. To do this, you must first remove the logo to access the first screw to unscrew. You also need to unscrew the two screws near the speedometer. Remove the upper front panel. To make bulb replacement easier, you need to remove the lower part by unscrewing all the screws (there are about 6). Remove the panel, and this is where you will replace the bulb by first taking off the cover that protects it, disengaging the bulb holder, and removing it from its socket to replace it with the new one.

Updated on 30 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Warning Light on the Yamaha X Max 300
How to Reset the Oil Warning Light on the Yamaha X Max 300
(Various brands) Various To reset the oil warning light on the Yamaha X Max 300, follow these steps: Turn off the ignition of the X Max, press and hold the mode and set butto…
How to replace the battery of a Yamaha Max 400
How to replace the battery of a Yamaha Max 400
(Various brands) Various In this video, you will learn how to replace the battery of a Yamaha Max 400. Obtain an Allen key and unscrew the bolts at the ends of the motorcycle…
Where to Find the Fuse Box on the Yamaha X Max 300
Where to Find the Fuse Box on the Yamaha X Max 300
(Various brands) Various If you are looking for the fuse box located inside your Yamaha X Max 300 but have not yet found it, just carefully read the following mini guide and …

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos