Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of a Yamaha Max 400

Model: (Various brands) Various
Part: Battery

In this video, you will learn how to replace the battery of a Yamaha Max 400. Obtain an Allen key and unscrew the bolts at the ends of the motorcycle's dashboard, allowing you to lift the plastic parts at the ends and remove the front plastic panel, being careful not to apply too much force. Now disconnect the battery connectors, paying attention to the terminals. Get the new battery and place it in position, reconnecting the terminals. Finally, reassemble the front plastic panel and screw in the 2 bolts with the Allen key.

Updated on 10 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Warning Light on the Yamaha X Max 300
How to Reset the Oil Warning Light on the Yamaha X Max 300
(Various brands) Various To reset the oil warning light on the Yamaha X Max 300, follow these steps: Turn off the ignition of the X Max, press and hold the mode and set butto…
Where to Find the Fuse Box on the Yamaha X Max 300
Where to Find the Fuse Box on the Yamaha X Max 300
(Various brands) Various If you are looking for the fuse box located inside your Yamaha X Max 300 but have not yet found it, just carefully read the following mini guide and …
How to Change the Short and Long Bulbs on a Yamaha X Max 125
How to Change the Short and Long Bulbs on a Yamaha X Max 125
(Various brands) Various To change the bulb on a Yamaha X Max 125, as shown in the video, you will need a 4 mm spanner, a 10 mm spanner, a Phillips screwdriver, and of course…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Where is the battery located on the Sym Jet X 125? Read answer
    • Vari - Where is the battery located on the Yamaha Xenter 125? Read answer
    • Vari - Where is the Sym Symphony 125 battery located? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos