Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on Volvo S60-V70-XC70-S80

Model: Volvo Volvo Various
Part: Service warning light

Resetting the service light on Volvo vehicles is practically identical across all models. This procedure works for the S60, V70, XC70, S80, and XC90. As with all cars, get into the vehicle and close all doors. Turn the key to position 1 (or press the start button once) without starting the engine. At the same time, press the button on the left side of the speedometer. After a few seconds, you will hear a confirmation sound, and your odometer will return to the previous value. An orange warning indicator may flash for a few seconds, but this depends on the year of manufacture of your vehicle.

Updated on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the BMS warning light on Volvo cars?
How do you reset the BMS warning light on Volvo cars?
Volvo Volvo Various In order to reset the BMS light on Volvo cars, you need to insert the ignition key into the corresponding slot so that you can turn on the instrument…
How to Reset the Service Light on a Volvo 850?
How to Reset the Service Light on a Volvo 850?
Volvo Volvo Various In this tutorial, you will see how to reset the service light on a Volvo 850, a very simple and quick operation. Before proceeding, ensure that all s…
How to Access the Fuse Box on a Volvo FH
How to Access the Fuse Box on a Volvo FH
Volvo Volvo Various Today's information will show you how to access the fuse box in the cabin of the Volvo FH, in simple steps. First, get inside the cabin and start by …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos