Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Centre Console Storage Compartment?

Model: (Various brands) Various
Part: Checks and maintenance

Each model is unique, so the actual steps may vary slightly when removing the centre console storage compartment. The video demonstrates how to remove the storage compartment on a Renault Capture. Generally, you need to unclip the plastic parts surrounding the storage compartment, starting from the outer edges. If there are clips, be careful not to lose them. Locate the screws securing the storage compartment and, using a small Torx key, unscrew them. There may be four or more. Disconnect the electrical cables, and at this point, you can extract the storage compartment.

Updated on 12 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Remove the Rear Wheel of a Motorcycle?
How to Remove the Rear Wheel of a Motorcycle?
(Various brands) Various As explained in the video, the first step is to mark the position of the bolts and especially the central axle with a marker. Next, loosen the chain …
Where are the fuses of the Scania located?
Where are the fuses of the Scania located?
(Various brands) Various The fuses of Scania vehicles are generally contained within the only fuse box present on the vehicle: in this type of vehicle, the box can be found i…
How to duplicate a Nice gate remote control
How to duplicate a Nice gate remote control
(Various brands) Various This is the standard learning system for this type of remote controls, and it is called "rolling code." We need to have a properly functioning "maste…

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - Why doesn't the Becker Map Pilot start? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos